FREE SHIPPING EUROPE
- 26 PROFESSIONAL CONNECTORS: 2.8mm thick stainless steel for 2V frequency geodesic dome. High resistance to rain. This kit contains only the connectors.
- VIDEOS, user manual and personal support: you will have access to all the assembly videos and a support phone line to guide you during the assembly.
- FLEXIBLE SIZE: You choose the size of your dome. E.g. joists of 1.25m = a dome of 4.8m in diameter and 2.4m in height. Joists of 1.47m = 5.6m in diameter and 2.80m in height.
- EASY MOUNTING: It takes about 4 hours for one person to mount the 2V frequency geodesic dome with the DOMESTAR connectors.
- Other hardware required for assembly (not supplied): 65 wooden uprights / joists / rafters, 130 TRCC bolts. Saw, drill, hammer, wrench, ladder or stepladder.
Video and assembly instructions:
Domestar F2 Instructions and Assembly Video
DOMESTAR: 26 stainless steel connectors for 2V geodesic dome (frequency 2)
Ultra-simple assembly
Fast assembly time:
- 2 hours for cuts
- 2 hours for assembly
- Assembly only possible!
The steps:
- Cut the wood into just 2 different lengths using the board
- Drill into the wood and insert bolts
- Follow the 7 assembly steps
The connectors avoid complicated angle calculations:
- No angle to calculate
- No corners to cut
DOMESTAR: 26 stainless steel connectors for 2V geodesic dome (frequency 2)
Package Contents:
What’s Included:
- 10 x 4-prong connectors
- 6 x 5-prong connectors
- 10 x 6-prong connectors
- Assembly instructions and links to assembly video
Technical features: strong connectors!
All connectors are made of A2/SS304 stainless steel in 2.8mm thickness
4 Branches
- 200mm
- 210g
5 branches
- 186mm
- 270g
6 branches
- 194mm
- 307g
In addition to the connectors, you’ll need:
- 65 wooden uprights / joists / rafters. You will have access to my calculator to determine the length of the amounts. There are only 2 different lengths.
- The length of the uprights will determine the diameter and height of the dome.
- 130 bolts 1 or 2 cm longer than the height of the studs.
Easy one-person assembly in 4 hours
You will need the following tools:
- a saw (normal or jigsaw, circular or radial) to cut the joists to the correct size
- a drill for holes in joists
- a hammer to drive the bolts
- a wrench to screw in the nuts
- a ladder or stepladder
The purchase of this kit includes a detailed instruction manual, installation videos and tutorials and telephone or email access to our assembly support service.
I do everything to make the assembly as easy as possible for you: once the material is gathered it takes about 4 hours to assemble the geodesic dome with the DOMESTAR connectors.
