FREE SHIPPING EUROPE
- 46 PROFESSIONAL CONNECTORS: 2.5mm thick galvanized steel for 3V frequency geodesic dome. High resistance to rain. This kit contains only the connectors.
- VIDEOS, user manual and personal support: you will have access to all the assembly videos and my support to guide you during the assembly.
- FLEXIBLE SIZE: the length of your joists will determine the size of your geodesic dome
- FAIRLY EASY ASSEMBLY: with 2 people it takes about 1 day for cutting, marking and drilling and 1 day for the assembly of the 3V dome
- Other material required for assembly (not included): 120 wooden uprights / joists / rafters (just 3 dimensions), 240 bolts. Saw, drill, hammer, wrench, ladder or stepladder.
Video and assembly instructions:
Domestar F3 3/8 Instructions & Assembly Video
46 galvanized steel connectors for 3V 3/8 geodesic dome (frequency 3)
What’s included:
– 15 x 4-branch
connectors- 6 x 5-branch
connectors- 25 x 6-branch
connectors- Assembly instructions and links to assembly video
Technical data:
Material: galvanized steel, 2.5 mm thick
Connector diameter: 19.5cm
Marking A, B and C of all connector branches
In addition to the connectors you will need:
120 wooden uprights / joists / rafters. You will have access to my calculator to determine the length of the amounts. There are only 3 different lengths.
The length of the uprights will determine the diameter and height of the dome.
240 TRCC bolts (round head square neck) 1 or 2 cm higher than the height of the uprights.
You will need the following tools:
– a saw (normal or jigsaw, circular or radial) to cut the joists to the correct size
– a drill for the holes in the joists
– a hammer to drive the bolts
– a wrench to screw in the nuts (better: an electric screwdriver)
– a ladder or stepladder
The purchase of this kit includes a detailed lined-up manual, installation videos and tutorials and access to our assembly assistance service. I do everything to make the assembly as easy as possible for you.
2 PEOPLE NEEDED FOR ASSEMBLY
Note that it really takes 2 people to mount a 3V geodesic dome (our connectors for 1V and 2V domes can be mounted alone) as some steps require supporting the lower floor.
Also note that a 3V dome disassembly without support of the lower floors will bend the connectors which will then no longer be usable. Disassembly is therefore to be reserved for experienced people.
Safety warning
Wear protective equipment when using tools, ensure structural stability during assembly, and have adequate assistance to prevent injury.
