SPECIAL OFFER FOR THE LAUNCH OF DOMESTAR 4V: I refund 50% of the purchase price if you provide me with the photo report of the assembly of this dome and 75% for a photo + video report (to illustrate the user manual). Contact me!
- Flat base model: these connectors allow for a flat base to the geodesic dome.
- 91 PROFESSIONAL CONNECTORS: 3mm thick galvanized steel for 4V 1/12 frequency geodesic dome. High resistance to rain. This kit contains only the connectors.
- INSTRUCTIONS FOR USE AND PERSONAL SUPPORT: you will have access to all the assembly steps and my stand to guide you during the assembly.
- FLEXIBLE SIZE: the length of your joists will determine the size of your geodesic dome
- FAIRLY EASY ASSEMBLY: for 2 people it takes about 2 days for cutting, marking and drilling and 2 days for the assembly of the 4V dome
- Other hardware needed for assembly (not supplied): wooden uprights / joists / rafters, 500 screws + bolts. Saw, drill, hammer, wrench, ladder or stepladder.
Calculator and assembly instructions:
Domestar F4: Mounting Calculator
DOMESTAR: 91 galvanized steel connectors for 4V 1/2 geodesic dome (frequency 4)
What’s included:
– 91 connectors
– assembly instructions
Technical data:
Material: galvanized steel, 3mm thick
Connector diameter: 19.5cm
Marking of all connector temples
In addition to the connectors you will need:
wooden uprights / joists / rafters. You will have access to my calculator to determine the length of the amounts.
The length of the uprights will determine the diameter and height of the dome.
500 screws and bolts 1 or 2 cm higher than the height of the studs.
The purchase of this kit includes a detailed instruction manual, installation tutorials and access to our assembly assistance service. I do everything to make the assembly as easy as possible for you.
2 PEOPLE NEEDED FOR ASSEMBLY
Note that it really takes 2 people to mount a 4V geodesic dome (our connectors for 1V and 2V domes can be mounted alone) as some steps require supporting the lower floor.
Also note that a 4V dome disassembly without a support for the lower floors will bend the connectors which will then no longer be usable. Disassembly without damaging the connectors is therefore reserved for experienced people.
